Saturday, 30 April 2011
Wednesday, 27 April 2011
Tuesday, 26 April 2011
Monday, 25 April 2011
mx key setup 3.4_rev2.0 download link
here u can download mx key & mx box new setup directly
https://www.dropbox.com/home/Public?select=mobileEx_setup_v3.4_rev2.0_20110420__1.exe#/Public:::
https://www.dropbox.com/home/Public?select=mobileEx_setup_v3.4_rev2.0_20110420__1.exe#/Public:::
Saturday, 23 April 2011
best tool for china mobiles gpg dragon
write flash\read flash\read unlock code\repair imei\repair Touch screen and format more function about box you can download the software
2. auto pin find SPD(SperadTrum)
write flash\read flash\read the unlock code\format\and change imei
3. auto pin find NXP
support NXP CPU write flash\read flash and read information
4. auto pin find Infineon
support Infineon 7880\7870 write flash\read flash\repair after flash can read sim card
5. auto pin find silabs
support silabs 4901\4904 read flash \write flash\unlock\format
6. auto pin find aunka
support anyka 3223\3224 write flash\read flash\format\unlock
7. auto pinfind qualcomm
Support old model using COM communication and Support new model using the usb communication
Support read the mobile code(unlock)
Supported CPU chips:
MTK 6205\6217\6218\6219\6223\6225\6226\6627\6228\6229\6230\6235\6238\6239\6253
SPD 6600D\6600M\6600E\6600I\6600H\6800D\8800D\WT6226\6600L
SI4901\SI4901
Infineon 7870\7880
Anyka 3223\3224
Nxp all cpu
Adi and sky cpu
Qualcomm CPU(cdma mobile)
Thursday, 21 April 2011
Saturday, 16 April 2011
z3x box for samsung available with support via teamviewer
Thursday, 14 April 2011
5130 show nokia then white display solution & 5130 v7.97 flash file link
step 1 : check open pcb with out camera
step 2: flash set with 7.97 ( i solved with this version in 7.96 ui setting failed with ufs phone cant go in test mode)
step 3: if with 7.97 still same problem & phone cant go in to test mode then put good flux on avilma & give heat then flash again
step 4 : finaly put good flux on cpu & give proper heat then just shake it with a needal slightly( for this must use infrared rework station, i solved 3 set with this process)
5130 7.97 flashfile link https://www.dropbox.com/home/Public#
best of luck to my all freinds & students
http://www.mobileclinicindia.com/
step 2: flash set with 7.97 ( i solved with this version in 7.96 ui setting failed with ufs phone cant go in test mode)
step 3: if with 7.97 still same problem & phone cant go in to test mode then put good flux on avilma & give heat then flash again
step 4 : finaly put good flux on cpu & give proper heat then just shake it with a needal slightly( for this must use infrared rework station, i solved 3 set with this process)
5130 7.97 flashfile link https://www.dropbox.com/home/Public#
best of luck to my all freinds & students
http://www.mobileclinicindia.com/
Wednesday, 13 April 2011
6233 white display after change bt module solution (incoming out going ok)
samsung dous d780 flashing with ufs( dual sim mobile)
samsung d780 has 2 sim slote master sim & slave sim. download its flash file from support area of ufs hwk it has 2 diffrent flash file for each sim slote , first write master .cla & .tfs file then write slave .cla & tfs file.
steps here
step 1: connect ufs box with computer with connect button
step 2: go to om/swift tab & select d780 model
step 3: choose .cla file & .tfs file in master then .cla & .tfs file for slave
step 4: connect e210 cable with ufs
step 5: click on write flash button & inset cable with out battery ur mobile will start boot & wait for write both master & slave file in to ur set ( note: if u will try to flash mobile with battery ur mobile will not connect with ufs )
DOWNLOAD D780 FLASH FILE & SOME EPROME FILE FOR SAMSUNG FROM THIS LINK
https://www.dropbox.com/home/Public#/Public:::
before some days customer come to my shop with d780 it has software problem. when set turn on it show some err no on screen with red color font. customer first go to samsung service center but his problem not solve they give his set back after 4 days. then i write flash with above given process. & his set is ok within 20 minutes. ( note thet if u will try to flash with battery ur set will not boot, if u try 100 times but it will not boot with battery)
if any one have any problem to flash set or need flash file add me in yahoo i will operate ur computer with teamviewer . my id keyur_raval1@yahoo.co.in
steps here
step 1: connect ufs box with computer with connect button
step 2: go to om/swift tab & select d780 model
step 3: choose .cla file & .tfs file in master then .cla & .tfs file for slave
step 4: connect e210 cable with ufs
step 5: click on write flash button & inset cable with out battery ur mobile will start boot & wait for write both master & slave file in to ur set ( note: if u will try to flash mobile with battery ur mobile will not connect with ufs )
DOWNLOAD D780 FLASH FILE & SOME EPROME FILE FOR SAMSUNG FROM THIS LINK
https://www.dropbox.com/home/Public#/Public:::
before some days customer come to my shop with d780 it has software problem. when set turn on it show some err no on screen with red color font. customer first go to samsung service center but his problem not solve they give his set back after 4 days. then i write flash with above given process. & his set is ok within 20 minutes. ( note thet if u will try to flash with battery ur set will not boot, if u try 100 times but it will not boot with battery)
if any one have any problem to flash set or need flash file add me in yahoo i will operate ur computer with teamviewer . my id keyur_raval1@yahoo.co.in
Subscribe to:
Posts (Atom)